Standard
O-Ring Molded from AMS7273 Material, Metric
2019-07-10
CURRENT
MA3434A
Search Results
Standard
O-Ring Molded from AMS7273 Material
2020-01-09
HISTORICAL
AS9967A
This standard establishes the dimensional and visual quality requirements, lot requirements, and packaging and labeling requirements for O-rings molded from AMS7273 rubber. It shall be used for procurement purposes.
Standard
O-Ring Molded from AMS7273 Fluorosilicone (FVMQ) Rubber Material
2022-06-27
CURRENT
AS9967B
This standard establishes the dimensional and visual quality requirements, lot requirements, and packaging and labeling requirements for O-rings molded from AMS7273 rubber. It shall be used for procurement purposes.
Standard
O-Ring Machined from AMS3617 Material
2020-01-13
CURRENT
AS9772A
This standard establishes the dimensional and visual quality requirements, lot requirements, and packaging and labeling requirements for O-rings machined from AMS3617 polyamide material. It shall be used for procurement purposes.
Standard
O-RING, SYNTHETIC LUBRICANT RESISTANT MOLDED FROM AMS-R-7362 RUBBER
2015-06-16
HISTORICAL
AS29561B
Standard
O-RING, MOLDED FROM AMS7379 RUBBER FOR USE WITH AS5202 PORTS
2021-11-09
CURRENT
AS6203A
Standard
O-RING MOLDED FROM AMS7379 FLUOROCARBON (FKM) MATERIAL
2023-06-06
CURRENT
AS5729B
THIS STANDARD ESTABLISHES THE DIMENSIONAL AND VISUAL QUALITY REQUIREMENTS, LOT REQUIREMENTS AND PACKAGING AND LABELING REQUIREMENTS FOR O-RINGS MOLDED FROM AMS7379 FLUOROCARBON (FKM) RUBBER. IT SHALL BE USED FOR PROCUREMENT PURPOSES.
Standard
O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL
2016-07-14
HISTORICAL
AS5729A
Standard
O-RING MOLDED FROM AMS7287 MATERIAL
2022-05-24
CURRENT
AS83485B
Standard
O-RING MOLDED FROM AMS7287 MATERIAL
2016-10-13
HISTORICAL
AS83485A
Standard
O-RING MOLDED FROM AMS7276 MATERIAL
2021-11-08
CURRENT
AS83248/1A
Standard
O-RING MOLDED FROM AMS7259 MATERIAL
2021-11-09
CURRENT
AS83248/2A
Standard
O-RING MOLDED FROM AMS-R-7362 NITRILE RUBBER MATERIAL
2021-09-15
CURRENT
AS29561C
THIS STANDARD ESTABLISHES THE DIMENSIONAL AND VISUAL QUALITY REQUIREMENTS, LOT REQUIREMENTS AND PACKAGING AND LABELING REQUIREMENTS FOR O-RINGS MOLDED FROM AMS-R-7362 NITRILE RUBBER. IT SHALL BE USED FOR PROCUREMENT PURPOSES.
Standard
Metallic Seal Rings for High Temperature Reciprocating Hydraulic Service
2011-12-19
CURRENT
AIR1077A
An attempt has been made to consider all features of seal ring design including configuration, materials, hardness, dimensions, surface finishes, surface treatment, leak testing, and general quality. In addition to this, allowable cylinder breathing and general quality requirements of mating hardware are discussed. Also, at the end of this report, there is a brief paragraph on other types of seal rings.
Standard
METALLIC SEAL RINGS FOR HIGH TEMPERATURE RECIPROCATING HYDRAULIC SERVICE
1992-07-01
HISTORICAL
AIR1077
An attempt has been made to consider all features of seal ring design including configuration, materials, hardness, dimensions, surface finishes, surface treatment, leak testing, and general quality. In addition to this, allowable cylinder breathing and general quality requirements of mating hardware are discussed. Also, at the end of this report, there is a brief paragraph on other types of seal rings.
Standard
Installation and Use of Equilateral Triangle Cross-Section Hydraulic O-Ring Seal Backup Rings (Dyna-Baks)
2008-07-16
HISTORICAL
AIR1186
Standard
Installation and Use of Equilateral Triangle Cross-Section Hydraulic O-Ring Seal Backup Rings (Dyna-Baks)
2011-12-19
CURRENT
AIR1186A
Standard
Gland Design, O-ring and Other Seals
2017-12-12
HISTORICAL
AS4716C
This SAE Aerospace Standard (AS) provides standardized gland (groove) design criteria and dimensions for O-ring seal glands for static and dynamic applications, and other seals.
Standard
Gland Design, O-ring and Other Elastomeric Seals, Static Applications
2005-03-30
HISTORICAL
AS5857
This SAE Aerospace Standard (AS) provides standardized gland (groove) design criteria and dimensions for elastomeric seal glands for static applications. The glands have been specifically designed for applications using SAE AS568 size O-rings at pressures exceeding 1500 psi (10.3 MPa) utilizing one or two anti-extrusion (backup) rings and applications at pressures under 1500 psi (10.3 MPa) without backup rings. The glands have been sized to provide increased squeeze as compared to AS4716 for more effective sealing at low temperatures and low seal swell conditions. These glands are not recommended for dynamic use. Primary usage is for static external sealing. The rod dimensions are the same as AS4716. The cylinder bore dimensions are the same as AS4716 except for sizes -001 thru -011 and -104 thru -113.
Standard
Gland Design, O-ring and Other Elastomeric Seals
2005-07-21
HISTORICAL
AS4716A
This SAE Aerospace Standard (AS) provides standardized gland (groove) design criteria and dimensions for elastomeric seal glands for static and dynamic applications. The glands have been specifically designed for applications using SAE AS568 size O-rings, with related class 2 tolerances, at pressures exceeding 1500 psi (10,342 kPa) utilizing one or two anti-extrusion (backup) rings and applications at pressures under 1500 psi (10,342 kPa) without backup rings. The glands have been sized to provide sufficient squeeze for effective sealing while at the same time limiting squeeze to allow satisfactory operation in dynamic applications. While this specification covers the basic design criteria and recommendations for use with standard size O-rings, these glands are also suitable for use with other elastomeric, and polytetrafluoroethylene (PTFE) based seals and packings.
